A remodeling contractor can look less expensive on paper simply because the bid leaves work out. Before you sign, compare what each contractor actually promises to deliver—not just the price at the bottom. This guide shows how to put competing bids on equal footing, check the people behind them, and make a decision you can explain later.
Start with one written scope—not three different conversations
Write down the project before requesting prices. For a bathroom remodel, list what stays and what gets replaced, the size of the room, fixture and finish preferences, demolition, disposal, electrical and plumbing expectations, permits, inspections, and cleanup. Give every bidder the same version, then ask them to list assumptions and exclusions separately.
If you change the scope after the first quote, send the update to all bidders. Otherwise you may be comparing an upgraded proposal against an older one. The Federal Trade Commission recommends multiple written estimates that describe the work, materials, timing and price; the lowest number is not automatically the best deal.
A worked example: the cheapest bid isn’t always the cheapest project
Imagine three contractors estimating the same small bathroom renovation. These prices are fictional examples to demonstrate the comparison method—not market estimates or quotations.
| Bid detail | Contractor A | Contractor B | Contractor C |
|---|---|---|---|
| Quoted price | $12,800 | $15,400 | $16,100 |
| Tile and fixtures | $1,500 allowance | Named selections | Named selections |
| Demolition and disposal | Included | Included | Included |
| Permits and inspections | Excluded | Included | Included |
| Drywall and paint | Unclear | Included | Included |
| Change-order process | Verbal approval | Written approval | Written approval |
| Verification status | Pending | Pending | Pending |
Bid A is $2,600 below B, but its lower allowance, excluded permits, unclear finish work and verbal change process create potential added costs. You cannot responsibly declare B or C the winner yet: first ask A to price the missing items, request identical fixture specifications from all three, and verify every contractor’s qualifications. A higher bid can also be overpriced; inclusion alone does not prove value.
Find the differences that change the real price
1. Identify allowances and selections
An allowance is a placeholder for a product or task that has not been fully selected or priced. Ask what amount is included, whether it covers materials only or installation too, and how overages and credits are calculated. Compare the same tile quality, fixtures, quantities, and labor assumptions. NARI’s homeowner guidance explains why scopes, materials and allowances can make otherwise similar bids differ.
2. Mark every exclusion and blank
Make a separate row for demolition, debris removal, subfloor repair, waterproofing, painting, fixtures, delivery, permits, inspections, and final cleanup, as applicable to your job. Mark each included, excluded, or unknown. Don’t treat a blank as included. Email the contractor: “Is this included in the quoted price? If not, what would it cost, and who performs it?”
3. Check who owns unexpected work
Hidden water damage or outdated wiring may not be visible until demolition. Ask what triggers a work stoppage, who documents the issue, how the proposed solution and price are presented, and whether you must approve a written change before work resumes. An emergency safety situation may require prompt protective action; define that exception in the agreement instead of leaving the entire change process verbal.
Verify the contractor—not just the paperwork
Ask for the legal business name, the license number where licensing applies, and the name of the individual or entity contracting with you. Check license status with the relevant state, county or city licensing authority using a website or telephone number you found independently. Different trades and jurisdictions have different rules, so don’t infer that a general business registration is the required contractor license.
Request current proof of liability insurance and ask whether workers’ compensation applies to the people doing the work. For an important job, verify the certificate details with the insurer or agency using an independently obtained contact. Ask who supervises subcontractors and who fixes their mistakes. Professional association membership, reviews, and insurance certificates are clues—not substitutes for actual license, coverage and reference checks.
Contact recent references about communication, change orders, cleanup, schedule slips and defect resolution. Ask to see examples of similar completed projects, but remember photos alone do not establish who performed the work.
Confirm permits, schedule, payment and warranty
Permits: find out who will do what
Contact the local building department for the actual permit and inspection requirements of your project. Put in writing who applies, pays, schedules inspections and addresses failed inspections. Rules differ by location and project type. Be cautious if a contractor suggests avoiding a required permit or leaves responsibility ambiguous.
Payments: connect money to visible progress
Ask for a written schedule with a deposit amount, milestone descriptions and final-payment conditions. Compare each payment with measurable completed work or materials properly accounted for. Avoid paying the full price up front, and verify any state or local deposit limits. Read financing terms separately; an attractive monthly payment can conceal a costly total obligation.
Schedule and warranty: define the finish line
Ask for approximate start and completion dates, work hours, access rules, responsible contact, a procedure for delays, and a final walk-through or punch list. Separate manufacturer product warranties from the contractor’s workmanship warranty. Record exactly how defects are reported and what the contractor promises to do. After the job, use a home maintenance log to keep the final invoice, warranty details, and any follow-up work easy to find.
Before signing, perform a contract cross-check
Compare the final contract with the corrected bid—not the salesperson’s verbal summary. Confirm the legal name and address, exact scope and exclusions, product specifications and allowances, permit responsibility, payment milestones, change-order approval, schedule, warranty terms, cleanup, and dispute/contact procedure. Do not sign with unresolved blanks. Cancellation rights and contract language depend on the jurisdiction and sales circumstances; the FTC explains some federal cooling-off protections but they do not apply to every home-improvement transaction.
Use a one-page comparison sheet with columns for item, Contractor A, B, C, evidence, and unanswered question. Save revised bids and your verification notes. For a companion planning resource, see the free remodel workbook. The broader Don’t Start That Remodel Yet guide covers additional decision points beyond comparing bids.
Your decision: Go, Investigate, or Walk Away
- GO: The work and exclusions are comparable, credentials and required insurance are verified, responsibilities are written down, and you understand the price and payment conditions.
- INVESTIGATE: An allowance is vague, a trade is omitted, a permit is unresolved, insurance details cannot yet be confirmed, or a substantial price gap remains unexplained. Request a revised bid before deciding.
- WALK AWAY: A contractor demands full payment in advance, refuses basic written terms or verification, pressures you to sign immediately, or proposes bypassing required permits.
Useful sources: FTC: How to Avoid a Home Improvement Scam; NARI: Home Remodeling FAQs; New York DFS: Contractor checks and written contracts.
Last reviewed November 3, 2026. Educational information only; not legal, engineering, or contracting advice. Licensing, deposit rules, insurance requirements, permits and cancellation rights vary by location and project. Confirm rules with local authorities and seek a qualified professional when needed.

